The CEL-2a Compressor/Expander/Limiter is designed for use in all live performance and recording applications, and can be incorporated as either two independent compressors or one synched stereo compressor with true RMS summing. Voltage-controlled amplifier and RMS-integrated circuits maintain low distortion and excellent noise performance.

• Stereo or dual mono operation
• Switchable low cut filter on each channel
• Switchable de-esser on each channel
• 1/4 inch TRS insert capability
• Fully adjustable compressor/limiter/expander
• Full gain reduction metering
• Input/Output switchable meters

30With 16 fully-dynamic digital filters, the Ferret makes feedback in any system a thing of the past.

The Feedback Ferret has already made a big impression by winning the prestigious EQ Magazine Blue Ribbon Award for Best Live Sound Signal Processor. The Ferret beat out hundreds of other new products in this category.

• 16 digital dynamic filters
• XLR and 1/4 inch (RTS) balanced inputs and outputs
• Four user presets
• Internal power supply

The kosmos® is a low frequency energy and stereo image enhancement system. It can provide planet-rattling bass while simultaneously causing the vocals to stand out in a mix and spread the stereo image. In operation, its sub-harmonic (QUAKE) processor watches the source material, analyzes the bass, then generates additional low frequencies an octave below it. It tracks the original bass without the mud of other bass processors, and is tuned to your speaker size for best performance. The QUAKEs activity is seismically monitored and indicated by an LED. Its output level is fully adjustable.

In addition to the QUAKE process, there is an additional bass boost circuit - THUD® - tuned an octave above the sub-harmonic range, which can be used to fill in and fatten out the low end. The left-right stereo image can also be intensified with the XPANSE® control, which gives improved separation and clarity (atmosphere).

All inputs and outputs are balanced. To guarantee proper levels, an input gain control is provided. A 0 dBu green signal LED and a +10 dBu red signal LED assist in input level setting. The subwoofer output has its own crossover and level control which supplies an equalized bass signal for systems with subs. The effects (including the added QUAKE and THUD® signals sent to the subwoofer) can be bypassed for the occasional reality check.

• Sub-bass generator/audio processor
• Controls for Level, Sub-terranean Shift® , Quake, Thud® , and Xpanse®
• XLR and 1/4 inch in/out
• Sub crossover output with level
• Global bypass
• Internal power supply
• One-rack-space

The new PV® Series power amps retain their two-channel design, high power points and exclusive Peavey features and technologies—such as DDT™ compression and Peavey patented Turbo-V™ Cooling. The PV® 900 delivers 300 watts per side into 4 ohms, 180 watts into 8 ohms and features detented input gain controls. It's a real workhorse.

All the features and proven reliability. The PV® 1500 features DDT™ distortion detection technique virtually eliminating distortion. It also features Peavey's patented Turbo-V™ cooling design, which cools the power transistors more evenly than traditional heat-sink designs.

Massive power in a small package. The PV® 2600 has XLR, 1/4 inch and barrier strip inputs with Peavey's famous DDT™ compression system, binding post and Speakon® output connectors.

• 2x900 watts at 4 ohms
• 2x550 watts at 8 ohms
• Massive toroidal transformer and storage capacitors
• Peavey patented Turbo-V® cooling system with 2-speed demand-sensitive fan
• Built-in 150 Hz/18 dB/oct subwoofer crossover with TRS output

•   DDT™ soft limiter protects amp and speakers

•  14 gauge steel chassis

•  Rear rack supports

•  Mil spec fiberglass circut boards

•  Current in-rush limiter

•  Overheat, short circut, clip limiting, DC, and faulty load protection

•  Detent gain controls

•  Neutrik® Speakon® and 5-way binding post outputs

•  5-year warranty